General Purpose Solenoid Valves
Skinner and Gold Ring Valves
Direct Acting & Pilot Operated
1/8" - 3/4" NPT
2-Way Direct Acting and Pilot Operated High Pressure valves are generally installed where high pressure and large flow requirements dictate the use of piston valves and/or valves with more robust seals such as PTFE and Ruby discs*. Pilot Operated valves require the minimum pressure differential specified
for proper valve operation.雙向直動和先導操作高壓閥通常安裝在高壓和大型流量要求要求使用活塞閥和/或堅固的密封，如聚四氟乙烯和紅寶石光盤。先導閥需要規定的小壓差確保閥門正常工作。
Pilot Operated Valves should be mounted with solenoid coils vertical and upright. Direct Acting valves can be mounted in any position. The preferred orientation is with the coil vertical and upright.先導閥應垂直安裝電磁線圈而且筆直。直接作用閥可安裝在任何位置。這個首選方向為線圈垂直和垂直。
Lubricated Air, Inert Gases, Water, Light Oil (300 SSU) and other non-compressible media.潤滑空氣、惰性氣體、水，輕油（300 SSU）和其他不可壓縮介質。
Use of non-lubricated gaseous media can affect valve life.使用無潤滑氣體介質會影響閥門壽命。
DC –12, 24 & 120
For other voltages – consult factory
Class F standard
Class H available
Standard valves with NEMA 4X or explosion proof solenoid enclosures are UL Listed and CSA Certified.
For additional details, consult factory.