• <th id="kmatt"></th>

    
    <ol id="kmatt"></ol>

    <tbody id="kmatt"></tbody>
    <em id="kmatt"><acronym id="kmatt"><input id="kmatt"></input></acronym></em>

    <em id="kmatt"></em>

  • <button id="kmatt"><mark id="kmatt"></mark></button>
  • <th id="kmatt"></th>


     

    Parker派克產品


    流體控制閥
    工程材料
      O型圈潤滑油
      測量及安裝工具
    13910122694
    產品資料下載
     
       

     

    Parker 流體連接件-診斷測試設備Diagnostic Testing Equipment
    Parker 診斷測試設備Diagnostic Testing Equipment
    Parker Diagnostic Testing Equipment
    Parker 派克 The Parker Service Master CONNECT

    Parker Service Master CONNECT是適用于移動和固定應用的通用測量設備。The Parker Service Master CONNECT is a universally appliable measuring device for mobile and stationary applications.

     

    Parker 派克 The Parker Service Master CONNECT 資料下載

     

    Parker Service Master CONNECT是適用于移動和固定應用的通用測量設備。The Parker Service Master CONNECT is a universally appliable measuring device for mobile and stationary applications.
    由于硬件和軟件中的模塊化結構系統以及廣泛的傳感器,它可以靈活地用于液壓應用中。例如,用于服務,調試,研發。Due to the modularly structured system in the hardware and software and the wide range of sensors it can be flexibly used in hydraulic applications. For example, for service, commissioning, research and development.
    測量設備可以處理不同的電信號。The measuring device can process different electrical signals.
    在CAN總線技術范圍內,可以連接以下傳感器。In the range of the CAN bus technology the following sensors can be connected.
    具有集成傳感器識別功能的Parker CAN傳感器。插入電源后,就不再需要手動設置測量信號和測量范圍了,而與壓力,溫度,流量或rpm傳感器無關。Parker CAN sensors with integrated sensor recognition. After plug in, manual parameterizing of the measurement signal and measuring range is no longer necessary – independent if pressure, temperature, flow or rpm sensors.
    連接標準CAN傳感器,由測量設備獨立提供和處理。Connection of standard CAN sensors, which are supplied and processed independently by the measuring device.
    與CAN系統為所謂的“聽”,即通信,以顯示和進一步處理的測量值,而不直接與總線控制器干擾。Communication with a CAN system for so-called “listening", i. e. to display and further process measurement values without interfering directly with the bus controller.
    可選的可以監視輔助安裝CAN通道和CAN總線報告的分析的過程中。An optional CAN monitor assists during installation of CAN channels and analysis of CAN bus reports.

    市場Markets:
    - 農業Agriculture
    - 國防Defence
    - 移動Mobile
    - 運輸Transportation
    - 建筑Construction
    - 工業Industrial
    - 汽車Automotive
    - 測試Testing
    - 維護和修理,MRO Maintenance and Repair, MRO

    應用Applications:
    - 移動液壓Mobile hydraulics
    - 運輸車輛Transport vehicles
    - 輸送車輛Conveyor vehicles
    - 商用車輛Commercial vehicles
    - 汽車技術Automotive technology
    - 油壓鑄模Oil molding
    - 測試設備和技術Test equipment and technology

    特點/優勢Features/ benefits:
    - 模塊化系統,由于可互換的測量模塊Modular system due to individual interchangeable measuring modules
    - 可變測量輸入:具有傳感器識別功能的Parker模擬和CAN傳感器,模擬傳感器,SAEJ-1939,CANopen,數字和頻率Variable measuring inputs: Parker analog and CAN sensors with sensor recognition, analog sensors, SAEJ-1939, CANopen, digital and frequency
    - 測量和顯示多達100個通道Measure and display up to 100 channels
    - 使用彩色7英寸觸摸屏進行直觀操作,適合與手套,堅固的3 mm玻璃,分辨率800 x 480像素一起使用Intuitive operation using the colored 7” touch display, Suitable for use with gloves, robust 3 mm glass, resolution 800 x 480 pixels
    - 額外的大型觸感鍵盤,即使在不利條件下也能確保操作Additional large tactile keyboard to ensure operation even in adverse conditions
    - 遠程控制應用Remote control application
    - 堅固,耐油的防護裝置,可在惡劣條件下使用并吸收沖擊Rugged, oil-resistant protection for use in harsh conditions and for shock absorption
    - 計算機分析軟件Computer Analysis Software
    - 媒體數據(pdf,圖片,視頻等)Media data (pdf, pictures, videos, ...)
    - 用于重復測量的模板的生成和存儲Generation and storage of templates for recurring measurements
    - 無線連接(WLAN,藍牙LE)Wireless Connections (WLAN, Bluetooth LE)

     

     

    The Parker Service Master CONNECT 型號:

    Part Part Type Version
    K-SCKIT-600-00 Measuring device in trolley case Kit: Measuring device in base version with calibration certificate according to ISO 9001 and carry strap incl. trolley case, 2x5m CAN cable, 2x 1,5m test hose M16x2 and 2xCAN terminating resistor
    K-SCKIT-600-0A Measuring device in trolley case Kit: Measuring device in base version without wireless connectivity with calibration certificate according to ISO 9001 and carry strap incl. trolley case, 2x5m CAN cable, 2x 1,5m test hose M16x2 and 2xCAN terminating resistor
    K-SCM-600-00 Mesuring device Base model with calibration certificate according to ISO 9001 , without input modules
    K-SCM-600-0A Mesuring device Base model with calibration certificate according to ISO 9001 , without wireless connectivity and without input modules
    K-SCMI-600-01 Input module Analogue input module for The Parker Service Master CONNECT incl. calibration certificate according to ISO 9001
    K-SCMI-600-03 Input module Analogue input module incl. electrical isolation for The Parker Service Master CONNECT incl. calibration certificate according to ISO 9001
    K-SCMSET-600-00-1-0 Measuring device incl. Input modules Base model with calibration certificate according to ISO 9001 and one analogue input module
    K-SCMSET-600-00-1-1 Measuring device incl. Input modules Base model with calibration certificate according to ISO 9001 and two analogue input modules
    K-SCMSET-600-00-2-0 Measuring device incl. Input modules Base model without wireless connectivity with one CAN input module
    K-SCMSET-600-00-2-1 Measuring device incl. Input modules Base model with calibration certificate according to ISO 9001 and with one CAN- and one analogue input module
    K-SCMSET-600-00-3-0 Measuring device incl. Input modules Base model without wireless connectivity with one analogue input module incl. electrical isolation
    K-SCMSET-600-00-3-1 Measuring device incl. Input modules Base model with calibration certificate according to ISO 9001 and with one analogue input module incl. electrical isolation and one analogue input module
    K-SCMSET-600-00-3-3 Measuring device incl. Input modules Base model with calibration certificate according to ISO 9001 and two analogue input modules incl. electrical isolation
    K-SCMSET-600-0A-1-0 Measuring device incl. Input modules Base model without wireless connectivity with calibration certificate according to ISO 9001 and one analogue input module
    K-SCMSET-600-0A-1-1 Measuring device incl. Input modules Base model without wireless connectivity with calibration certificate according to ISO 9001 and two analogue input modules
    K-SCMSET-600-0A-2-0 Measuring device incl. Input modules Base model without wireless connectivity with calibration certificate according to ISO 9001 and one CAN input module
    K-SCMSET-600-0A-2-1 Measuring device incl. Input modules Base model without wireless connectivity with calibration certificate according to ISO 9001 and one CAN- and one analogue input module
    K-SCMSET-600-0A-3-0 Measuring device incl. Input modules Base model without wireless connectivity with calibration certificate according to ISO 9001 and one analogue input module incl. electrical isolation
    K-SCMSET-600-0A-3-1 Measuring device incl. Input modules Base model without wireless connectivity with calibration certificate according to ISO 9001 and with one analogue input module incl. electrical isolation and one analogue input module
    K-SCMSET-600-0A-3-3 Measuring device incl. Input modules Base model without wireless connectivity with calibration certificate according to ISO 9001 and two analogue input modules incl. electrical isolation
    SC-ACC-02 Optional Accessories Carry strap for The Parker Service Master CONNECT
    SCC-600 Optional Accessories Trolley case for The Parker Service Master CONNECT
    SCK-315-02-35 Optional Accessories USB Cable
    SCK-318-02-37 Optional Accessories LAN Cable
    SCK-318-05-21 Optional Accessories KFZ charging cable 12/24VDC
    SCK-401-4M Optional Accessories Plug M12x1 for external sensor input
    SCKIT-600-00 Measuring device in trolley case Kit: Measuring device in base version with carry strap incl. trolley case, 2x5m CAN cable, 2x 1,5m test hose M16x2 and 2xCAN terminating resistor
    SCKIT-600-0A Measuring device in trolley case Kit: Measuring device in base version without wireless connectivity with carry strap incl. trolley case, 2x5m CAN cable, 2x 1,5m test hose M16x2 and 2xCAN terminating resistor
    SCM-600-00 Mesuring device Base model without input modules
    SCM-600-0A Mesuring device Base model without wireless connectivity and without input modules
    SCMI-600-01 Input module Analogue input module for The Parker Service Master CONNECT
    SCMI-600-02 Input module CAN input module for The Parker Service Master CONNECT
    SCMI-600-03 Input module Analogue input module incl. electrical isolation for The Parker Service Master CONNECT
    SCMSET-600-00-1-0 Measuring device incl. Input modules Base model with analogue input module
    SCMSET-600-00-1-1 Measuring device incl. Input modules Base model with two analogue input modules
    SCMSET-600-00-2-0 Measuring device incl. Input modules Base model with one CAN input module
    SCMSET-600-00-2-1 Measuring device incl. Input modules Base model with one CAN- and one analogue input module
    SCMSET-600-00-3-0 Measuring device incl. Input modules Base model with one analogue input module incl. electrical isolation
    SCMSET-600-00-3-1 Measuring device incl. Input modules Base model with one analogue input module incl. electrical isolation and one analogue input module
    SCMSET-600-00-3-3 Measuring device incl. Input modules Base model with two analogue input modules incl. electrical isolation
    SCMSET-600-0A-1-0 Measuring device incl. Input modules Base model without wireless connectivity with one analogue input module
    SCMSET-600-0A-1-1 Measuring device incl. Input modules Base model without wireless connectivity with two analogue input modules
    SCMSET-600-0A-2-0 Measuring device incl. Input modules Base model with calibration certificate according to ISO 9001 and one CAN input module
    SCMSET-600-0A-2-1 Measuring device incl. Input modules Base model without wireless connectivity with one CAN- and one analogue input module
    SCMSET-600-0A-3-0 Measuring device incl. Input modules Base model with calibration certificate according to ISO 9001 and one analogue input module incl. electrical isolation
    SCMSET-600-0A-3-1 Measuring device incl. Input modules Base model without wireless connectivity with one analogue input module incl. electrical isolation and one analogue input module
    SCMSET-600-0A-3-3 Measuring device incl. Input modules Base model without wireless connectivity with two analogue input modules incl. electrical isolation
    SCNA-SMC-CAR Optional Accessories KFZ charging cable 12VDC
    SCSN-470 Optional Accessories Power supply incl. Country adapter EUR, UK, US and AUS

     

     


       

    美國DMK Engineering Solutions公司
    信德邁科技(北京)有限公司 CNMEC Technology


    E-mail:sales@cnmec.biz fcg.cnmec@parkerdistribution.com.cn
    地址:北京市朝陽區望京街10號望京SOHO塔1C座2115室
    郵編:100102
    電話:010-8428 2935, 8428 9077, 8428 3983
    手機:139 101 22694
    Http://www.cnmec.biz
    傳真:010-8428 8762


    京ICP備08000876號-8
    京公網安備 11010502019740



    在线看亚洲十八禁网站,国产午夜精品美女视频,日产中文字幕在线精品一区,一本到高清视频不卡dvd,日本三级手机在线播放线观看